The top sliding dovetail shelf has been installed and glued into place. The bottom shelf (that will later house a sliding dovetail installed divider) is being fitted. I cut most of the sliding dovetail a hair undersized so that it will slide easily into the female portion of the dovetail joint. I left the last inch or so a bit tight so that it would snug the joint tight when it was seated fully into place. Before the lower shelf is installed I am cutting the sliding dovetail for the drawer divider. Most of the waste was removed on the table saw. The remainder of the joint will be completed on the router table. |
0 Comments
Leave a Reply. |
Archives
September 2018
Categories |